Do you wish your current toilet had more flushing power, or are you looking for a new high-pressure model? A high-power flush toilet might be the solution for your frequently clogged drains and the necessity to flush multiple times to get everything down the toilet. Find out why a high-power flush might be the right choice and what to look for in a model before making your final purchase.
*This is a collaborative post. Image Source
*This is a collaborative post. The Types of High-Power Toilets
There are four distinct models of powerful toilets available for the home market. These variants share one common feature: superior flushing power compared to the standard waterless commode. You can choose from the following high-power toilets:
- Pressure-Assisted – Upgrade from a standard toilet to one that utilises compressed air to increase flush force without increasing water consumption. Aside from being a bit more expensive, they also tend to be louder.
- Siphon Jet – A syphon jet flush toilet is a type of toilet that uses a specialised flushing mechanism. It’s a small tank that acts as a reservoir and can be set up alongside existing infrastructure. To improve the effectiveness of your flush, water is released via a vacuum pull.
- Double Force Flush – These models feature signature pressurised jets at the bowl’s rim. The Double Cyclone’s and the Tornado’s dual and triple nozzles produce a powerful vortex flush, which aids in cleaning the bowl by forcing the waste down.
- Double Vortex – The Double Vortex, which can be found in toilets, uses jets to generate a stronger flush. A nozzle is located at the top of the bowl, and another is near the drain; these two nozzles direct water in opposite directions, generating a powerful current.
Ways To Increase Your Toilet’s Flushing Power
You can avoid spending money on a new toilet by learning to boost the force of the flush on an existing one. There is no way to increase the flushing power of an existing low-flow toilet, but keeping the toilet you have might be worthwhile. The following are some suggestions for keeping the flush rate high:
- Examine For Clogs – Instead of replacing the toilet if the low flow is caused by Blocked Drains Sydney, consider clearing the drain first. It would be best if you also looked for clogs in your toilet drain.
- Replace Your Broken Flush Valve – Your toilet’s flush valve is likely located at the very base of the tank. If you can’t find the mechanism that raises to let water out when you flush, shaking the handle might help. If the flush valve is broken or cracked, it will reduce the force of the flush.
- Adjust Your Tank’s Float – Look at the toilet’s water level by opening the tank. If the water level is too low, you might not be able to complete a full flush. Ensure the float valve’s length is in the middle of the tank’s minimum and maximum settings.
- Utilise Baking Soda Combined With Vinegar as Toilet Tank Soaks – One quarter of white vinegar should do it. Locate the overflow hose of rubber fastened to the overflow valve in the toilet tanks. Maintaining the tube’s position inside the container, insert a funnel through its open end for convenient dispensing. After about 15 minutes, pour the vinegar into the tube and let it sit. Then, drop by drop, until it hisses, add baking soda. If the toilet doesn’t flush smoothly after two hours, try not flushing it.
- Clean Out The Rim Jets – Over time, mineral deposits can clog the water-releasing jets in a toilet, requiring a thin wire to remove the residues. Straightening out a wire coat hanger provides instant access to a helpful tool around the house.
Upgrading To A Stronger Flush
High-power flushes can help reduce or eliminate clogs because they move waste further and faster. They maintain a healthy sewer system and septic tank, reducing the likelihood of a backup. When you invest in good quality, modern products, you can be sure they will perform well and last longer.
If you usually have to flush twice or reach for the plunger more often, contact reputed and well-established Plumber Sydney. They will provide you with all the necessary information on the various products available in the market that will suit your specific requirements.
*Disclaimer – This is a collaborative post. This post has been pre-written.
